The 2014 Ford Explorer sticks out inside the mid-length SUV market not best for its spacious indoors and strong performance but additionally for its advanced features, which include the vehicle start functionality. This feature enhances comfort, allowing drivers to begin their vehicle remotely, making sure of cushy surroundings earlier than entering.
What is Auto Start?
Auto start, normally referred to as remote start, permits the motive force to start the automobile’s engine from a distance using a key fob. This feature is especially useful in severe climate conditions, allowing the car’s weather management gadget to adjust the temperature earlier than the motive force enters.
How Remote Start Works
To utilize the faraway begin feature inside the 2014 Ford Explorer, observe these steps:
Lock the Doors: Press the lock button for your key fob to secure all doorways.
Activate Remote Start: Press theRemote Start button two times. The outdoor lights will flash to signify a hit activation.
The car will run for a preset period (normally 5, 10, or 15 minutes) before robotically shutting off unless extended by way of repeating the faraway start system.
Key Features of Remote Start
Range: The faraway begin device typically operates within about 300 toes.
Climate Control: If prepared with automated weather management, it will adjust according to preceding settings whilst activated remotely.
Safety Features: The machine will not feature if:
The ignition is on.
The hood is open.
The transmission is not in park (P).
The automobile battery voltage is low.
Benefits of Remote Start
Convenience: Start your automobile from the interior of your own home or office, saving effort and time.
Comfort: Precondition your car’s interior temperature for consolation for the duration of severe climate conditions.
Security: Provides an delivered layer of protection through permitting you to start your vehicle without entering it.
Installation and Upgrades
While many 2014 Ford Explorers come with manufacturing unit-set-up Remote start abilities, some owners might also want to add or upgrade their systems. Here are alternatives to be had for installation:
Factory Installation
For those looking to maintain OEM nice, Ford gives a manufacturing unit far-off start kit that includes the whole lot needed for installation. This kit usually consists of:
A faraway starter module
Wiring harness
Key fobs programmed for far-off start
Aftermarket Solutions
Several aftermarket solutions are available that allow for clean installation and better capability. These include:
Start-X Kits: These kits permit remote starting by way of sincerely pressing the lock button for 3 instances on your current key fob, casting off the want for extra remotes.
MPC OEM Remote Activated Starter: This pre-flashed unit guarantees compatibility with fashions from 2011-2015 and offers seamless integration with existing capabilities.
Troubleshooting Common Issues
While the usage of the far-off start function is commonly sincere, users can also come upon some troubles. Here are not unusual issues and their answers:
The vehicle Does Not Start
Ensure that every doorway is locked before attempting to use far off-start.
Check if the hood is closed and that the transmission is in the park.
Verify that the battery voltage is enough.
Remote Start Fails to Activate
Confirm that the important thing fob battery is practical.
Ensure that no alarms are triggered or disabled capabilities.
Climate Control Not Functioning
Check if computerized weather control settings have been efficaciously configured earlier than shutting off the automobile.
Programming and Troubleshooting the 2014 Ford Explorer Auto Start Feature
The 2014 Ford Explorer is ready with a convenient remote begin characteristic, permitting drivers to begin their car from a distance. This capability is particularly useful for pre-conditioning the indoor temperature before getting into the automobile. However, customers may also come across issues with programming or functionality. This guide presents unique instructions on a way to software the car starts characteristic, troubleshoot unusual troubles, and make use of the far-off begin correctly.
How to Start Your 2014 Ford Explorer with the Key Fob
To use the faraway start function on your 2014 Ford Explorer, observe these steps:
Lock the Vehicle: Press the lock button on your key fob to steady all doors.
Activate Remote Start: Press the far-off begin button two times within some seconds. The vehicle’s lighting will flash to suggest that it has correctly begun.
Programming the Remote Start Feature
If you need to program or reset your remote begin function, right here’s how to do it:
Turn on Ignition: Insert your key into the ignition and flip it to the “On” function without starting the engine.
Activate Remote Start
For push-button begin cars, press the begin button without urgent the brake pedal.
Hold the lock button on your key fob for one second, then turn off the ignition.
Test Remote Start: Lock your car again and attempt the usage of the far-off start feature as defined above.
Common Issues with Remote Start Not Working
If you find that your remote begin feature isn’t always functioning effectively, several elements will be at play:
Key Fob Battery: A susceptible battery to your key fob can prevent the remote start from running. Replace it with a CR2032 battery if important.
Ignition Status: Ensure that the ignition is turned off while trying to use far off-start.
Hood Position: The Remote start will not feature if the hood is open or if there’s an issue with the hood switch.
Vehicle Status: Check that your car is in the park (P) and that no alarms are brought about. If there’s a take-look engine light on, this can also disable the Remote begin functionality.
Troubleshooting Steps
If your far-off begin is still now not working after checking these items, observe these troubleshooting steps:
Resetting Remote Start
Start your car with the use of the ignition.
Press and preserve the Remote Begin button for approximately ten seconds.
Turn off your automobile and lock it using the key fob.
Try the use of the remote begin again.
Check Vehicle Settings
Access your automobile’s settings through the facts display.
Navigate to “Vehicle” settings and make sure that far-off begin is enabled.
Inspect Hood Switch:
Ensure that the hood switch is functioning successfully; it has to be pressed down whilst the hood is closed.
Using Ford Remote Start without a Button
In a few instances, owners might also want to prompt their Ford Explorer’s engine without using the traditional key fob approach. Some aftermarket systems allow for phone integration through apps like Ford Pass, which could permit far-off starting through a cellular tool.
Ford Explorer Remote Start App
The Ford Pass App allows customers to govern numerous functions of their Ford motors remotely, which includes starting their engine, locking/unlocking doors, and checking car status. To use this app:
Download and install the Ford Pass app from your tool’s app store.
Create an account or log in in case you have already got one.
Link your car with the aid of getting into its VIN.
Use the app to get entry to Remote Start features directly out of your smartphone.
Understanding Auto Start-Stop Feature
The car begin-prevent characteristic in more recent models of automobiles allows improved gas efficiency via routinely shutting off the engine when idling (e.g., at visitors’ lighting) and restarting it when pressing the accelerator pedal. While this option isn’t always trendy in all 2014 Explorers, those prepared with it could benefit from reduced fuel consumption.
User Feedback and Experiences
Owners of the 2014 Ford Explorer have normally praised the automobile start function for its comfort and ease of use. Many highlight how it substantially improves comfort all through cold winters or warm summers. However, some customers have referred to occasional problems with range and reliability, mainly in urban areas with high interference.
Graphical Representation of User Satisfaction
A survey conducted amongst Ford Explorer proprietors found insights into user pride regarding the car start function:
Conclusion
The 2014 Ford Explorer’s automobile characteristic represents a blend of convenience and the modern era, enhancing personal enjoyment via ease of use and luxury. Whether factory-set up or introduced through aftermarket solutions, this option stays a treasured asset for drivers in search of comfort at some point in varying climate situations. As technology keeps conforming, so too will improvements in automobile capabilities like remote beginning, ensuring that motors stay person-pleasant and accommodating in an ever-changing automotive landscape.
FAQs on Remote Start for the 2014 Ford Explorer
Here are solutions to a few regularly asked questions concerning the faraway beginning function of the 2014 Ford Explorer.
How do I faraway begin my 2014 Ford Explorer?
To far off begin your 2014 Ford Explorer, observe these steps:
Lock the Vehicle: Press the lock button on your key fob to stabilize all doorways.
Activate Remote Start: Press the faraway begin button two times within some seconds. The outside lighting will flash two times to confirm that the car has commenced.
This function allows you to start your engine from as much as 300 feet away, assisting in preconditioning the vehicle’s indoor temperature before you input.
How do you remote begin a 2014 Ford?
The method for remote beginning a 2014 Ford car is comparable across models ready with this option:
Ensure All Doors Are Locked: Use the lock button on your key fob.
Press the Remote Start Button Twice: This will provoke the engine start sequence.
If a success, the vehicle’s lighting will flash, indicating that it has started. If it does not work, test for issues which include a low-key fob battery or an open hood.
Does my Ford Explorer have a faraway beginning?
To decide in case your Ford Explorer is equipped with faraway begin:
Check Your Key Fob: Look for a button categorized “faraway begin” or comparable.
Consult Owner’s Manual: Your vehicle’s manual will suggest whether this option is protected.
Look for Factory Installed Features: If your automobile has automatic weather control and different advanced functions, it in all likelihood consists of a faraway begin.
If you are nonetheless unsure, you could contact your nearby Ford dealership together with your VIN for affirmation.
How do I know if my Ford has a faraway start?
You can confirm in case your Ford car has remote begin using:
Inspecting the Key Fob: Look for a devoted Remote start button.
Checking Vehicle Settings: Access the settings on your dashboard display; appear under “Vehicle” settings to see if far-off start is enabled.
Reviewing Documentation: Your proprietor’s manual or window sticker might also suggest if this option is protected.
If needed, reach out to a Ford dealer with your VIN for detailed specs regarding your vehicle’s capabilities.
Troubleshooting Remote Start Issues
Battery Check: Ensure that the important thing fob battery is purposeful (CR2032 battery).
Ignition Status: The ignition needs to be off; if it’s on, the remote starts received’t paintings.
Hood Position: The hood needs to be closed; an open hood will disable the function.
Transmission Position: Ensure that the car is in the park (P).
Check Engine Light: If this light is on, it’ll prevent far-off beginning because of protection protocols.
| Satisfaction Level | Percentage of Users |
| Very Satisfied | 60% |
| Satisfied | 25% |
| Neutral | 10% |
| Dissatisfied | 5% |
Comparison of Installation Options
| Feature | Factory Installation | Aftermarket Solutions |
| Compatibility | Guaranteed with OEM parts | Varies by manufacturer |
| Installation Complexity | Moderate | Generally easy (Plug & Play) |
| Cost | Higher (dealer fees) | Typically lower |
| Warranty | OEM warranty applicable | Varies by product |